Low-Frequency Driver Design Car Component Speaker System Audio



SKU: 9RoXy1xJ1R4rpabR Category:



Woofer drivers benefit from proprietary FEA modeling and JL Audio’s expertise in low-frequency driver design.

This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-650 is a proprietary, stamped, steel 6.50-inch (165 mm) frame and a DMA-optimized motor system.

A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control the voice coil’s motion.

Tinsel leads are carefully routed and attached to the spiders to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.


Audio C1-650 C1 Series 6-1/2″ 50W RMS (225W Peak Power Handling) 2-Way Car Component Speaker System

Diameter : 6.5 Inch

Sensitivity : 91 dB

Frequency Response : 59-22000 Hz

Peak Power Handling : 225 Watts

Design : 2 Way

Shallow Mount : No

RMS Power Handling : 50 Watts

Key Features:

General Specifications:

Continuous Power Handling (RMS): 50 W

Recommended Amplifier Power (RMS): 10 – 75 W / Ch.

System Efficiency: 91.0 dB @ 1 W / 1 m

System Nominal Impedance: 4 Ω

System Frequency Response: 59 Hz – 22 KHz ± 3 dB

Woofer Physical Specifications:

Frame Outer Diameter* (A): 6.25 in / 159 mm

Grille Tray Outer Diameter (B): 6.84 in / 174 mm

Motor Outer Diameter (C): 3.15 in / 80 mm

Frontal Coaxial Tweeter Protrusion (D): N/A

Frontal Grille Protrusion** (E): N/A

Mounting Hole Diameter (F): 5.02 in / 128 mm

Mounting Depth (G): 2.07 in / 53 mm

Tweeter Physical Specifications:

Flush Mount Fixture Diameter (A1): 1.87 in / 48 mm

Surface Mount Fixture Diameter (A2): 1.69 in / 43 mm

Flush Mount Mounting Hole Diameter (B): 1.625 in / 41 mm

Flush Mount Mounting Depth (C): 0.76 in / 19 mm

Flush Mount Tweeter Frontal Protrusion (D1): 0.29 in / 7 mm

Surface Mount Tweeter Frontal Protrusion (D2): 0.92 in / 23 mm

Crossover Physical Specifications:

Width (W): 1.96 in / 50 mm

Height (H): 0.90 in / 23 mm

Depth (D): 1.34 in / 34 mm

Weight: 7.01

Authorized Internet Dealer

PLG6C GEAR 6-1/2” 200W RMS (400W Peak Power Handling) 2-Way Custom Component System (Pair)

Diameter : 6.5 Inch

Frequency Response : 50-5000 Hz

Peak Power Handling : 400 Watts

RMS Power Handling : 200 Watts

This Custom Kit Contains

One Pair 6.5” Mid Bass Speaker

Standard 6.5” Size Fits OEM Locations

Yellow Color Poly Injection Cone

Non-Fatiguing Butyl Rubber Surround

High Temperature Aluminum Voice Coil

Special Electroplated Steel Basket

40 Oz. Magnet Structure

Power Handling: 200 Watts RMS / 400 Watts MAX

Impedance: 4 Ohm

Frequency response: 50Hz-5KHz

Mounting Depth: 2.65”

One Pair 0.5” Tweeter:

0.5” Silk Dome Tweeter

Neodymium Magnet

3 Mounting Options: Flush Surface or Angle Mount

50 Watts RMS / 100 Watts peak

Frequency response: 1.3-22KHz

Impedance: 4 Ohm

One Pair Passive Crossover Network:

Two – Way Passive Crossover

12 dB Octave Slope


Includes Grills Wires Installation Hardware

Wiring Ki

Wiring Diagram Template

Weight: 7

Authorized Internet Dealer

EF-60C Edge Series 6-1/2″ 250W RMS (500W Peak Power Handling) 2-Way Component Car Speakers

Diameter : 6.5 Inch

Sensitivity : 92 dB

Frequency Response : 65-20000 Hz

Peak Power Handling : 500 Watts

RMS Power Handling : 250 Watts

Power Handling:

Peak: 500 watts per set / 250 watts each side

RMS: 250 watts per set / 125 watts each side

Recommended Power Range: 60 – 125 watts RMS per channel

Carbon Fiber Injection Molded Polypropylene Cone

Treated Woven Cloth Surround1′ Flush Mount Dome Tweeter

1′ Voice Coil on Aluminum Former

Quick Disconnect Terminals

Top-mount Depth: 1.75″

4 ohms impedance

Frequency Response: 65 – 20,000 Hz

Sensitivity: 92 dB

Passive Crossover Included

Speaker Grill Included

Weight: 5

Authorized Internet Dealer

S-S65C S-Series 6.5″ 80W RMS (240W Peak Power Handling) 2-Way Component System

Diameter : 6.5 Inch

Sensitivity : 88 dB

Frequency Response : 70-22000 Hz

Peak Power Handling : 240 Watts

Design : 2 Way

Shallow Mount : No

RMS Power Handling : 80 Watts


S-Series speakers deliver the winning combination of incredible sound and value within the entry-level category

Larger voice coil and new CFRP (Carbon Fiber Reinforced Plastic) cone

Now with Alpine’s patented HAMR (High Amplitude Multi-Roll) Surround, allowing for large amounts of linear air movement

1-inch silk dome tweeter

Available 6.5-inch S-Series Speaker Grills (sold separately)


Woofer Size: 6-1/2″ (16.5cm)

Tweeter Size: 1″ (2.5cm)

Cutout Diameter: 5″ (12.8cm)

Mounting Depth: 2-9/32″ (5.8cm)

Peak Power Capacity: 240W

RMS Power Capacity: 80W

Impedance: 4 ohms

Frequency Response: 70 Hz – 22 kHz

Sensitivity: 88 dB SPL (1W @ 1m)

Recommended Amplification: Up to 80W RMS per channel

Weight: 8

TS-A652C A-Series 6-1/2″, 80W RMS (350W RMS Peak Power Handling) 2-Way 4-Ohm Component Car Speaker System

Diameter : 6.5 Inch

Sensitivity : 85 dB

Frequency Response : 34 – 49000 Hz

Peak Power Handling : 350 Watts

RMS Power Handling : 80 Watts


System Type : 2 Way Component

Sound Pressure Level (sensitivity): 85dB (+/- 1.5dB)

Frequency Range 34Hz to 49 kHz

Continuous Power Handling (RMS): 80 Watts

Maximum Peak Power Handling: 350 Watts

Nominal Impedance: 4 ohms

Woofer Cone Diameter 6 – 1/2″

Woofer Cone Material Carbon and mica reinforced IMPP in moonstone gray

Surround Material Elastic polymer

Woofer Magnet Material Ferrite

Woofer Magnet Weight 11.3 oz

Mounting Depth 2- 3/8″

Tweeter Type Seperate component 20mm polymide hard dome tweeter

Crossover Frequency 2,500 Hz

Multi-fit Installation Adaptors: woofer and tweeter included


20mm polyimide (PI) hard dome tweeter.

6-1/2″ carbon and mica reinforced injection molded polypropylene (IMPP) cone construction.

Universal woofer basket design expands installation flexibility for maximum bass and sound quality.

Included multi-fit installation adapters for woofer and tweeter optimize fitment in applicable original equipment (OE) speaker locations.

Unique moonstone gray colored cone.

Weight: 5


Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. Please refer to the actual product. The measurement allowed error is +/- 1-3cm.

Unshipped Items Return Policy

35 % restocking fee will be charged for unshipped item returns without valid reason within 30 days of the original order being processed.

Shipped Items Return Policy

For quality or other issues, the Buyer can request a refund or reshipment within 7 days after the end customer has received the item. The reshipment fee will be borne by the Seller.

*Product Notes:

1. For any product problems, you must provide communication vouchers, pictures, videos, etc. with the seller.

2. If the product is returned to the overseas warehouse due to the wrong address, no refund will be given.

3. No reason to return any non-product problems, such as the following wrong order, wrong purchase by customer, customer dislike, etc.

4. Please contact the online customer service before returning the product for a refund, otherwise the return will not be refunded.

5. Items must be unworn, undamaged and in original packaging.


Dropshipping to 48 states in the United States. Some remote states in the United States (short code: PR, HI, VI, AE, AP, AK, GU, AS, MP) do not provide a drop shipping service for the time being.

Additional information

Weight 19.57704888201713 kg
Dimensions 0.0 × 0.0 × 0.0 cm

Yellow, Black


PLG6C, S-S65C, EF-60C, 6.5 Inch, TS-A652C

Accessibility Toolbar